Being able to run Linux out of a usb bar is a great way to enjoy the live CD experience (being able to use Linux on any computer you might get by) and the big advantage of being easier to carry around than a CD.
1. Requirements
In order to reproduce this tutorial, you will need a few items such as:- a ubuntu liveCD
- a usb bar of at least 1G
- a running Linux operating system
2. Setting up the USB disk
2.1. Finding the device
In the first place, you need to plug your usb drive and check under which device it is associated. To find out the device, run:$ sudo fdisk -l
On my system, the device appears as being /dev/sdb, I will therefore use /dev/sdb as a reference for this tutorial, please replace it accordingly to your system (might be sda, sdc ...).Once you found your device, you are going to create the partitions.
Using the wrong device name might destroy your system partition, please double check
2.2. Making the partitions
Make sure every of your already mounted partition are unmounted:$sudo umount /dev/sdb1
and then launch fdisk, a tool to edit partition under linux: sudo fdisk /dev/sdb
We are going delete all the partition and then create 2 new partition: one fat partition of 750M which will host the files from the live CD iso, and the rest on another partition.At fdisk prompt type d x where x is the partition number (you can simply type d if you only have one partition), then:
- n to create a new partition
- p to make it primary
- 1 so it is the first primary partition
- Accept the default or type 1 to start from the first cylinder
- +750M to make it 750 Meg big
- a to toggle the partition active for boot
- 1 to choose the 1 partition
- t to change the partition type
- 6 to set it to FAT16
- n to create yet again a new partition
- p to make it primary
- 2 to be the second partition
- Accept the default by typing Enter
- Accept the default to make your partition as big as possible
- Finally, type w to write the change to your usb pendrive
2.3. Formatting the partitions
The first partition is going to be formated as a FAT filesystem of size 16 and we are going to attribute it the label "liveusb".$ sudo mkfs.vfat -F 16 -n liveusb /dev/sdb1
The second partition is going to be of type ext2 with a blocksize of 4096 bytes and the label casper-rw. Mind that it has to be labeled as casper-rw otherwise the tutorial won't work!.$ sudo mkfs.ext2 -b 4096 -L casper-rw /dev/sdb2
At this stage, our usb pendrive is ready to host the liveCD image. Now, let's copy the files to the usb bar.3.1. Mounting Ubuntu liveCd image
In the first place we need to mount our ubuntu iso. Depending if you have the .iso file or the CD, there is 2 different ways of mounting it.3.1.1. Mounting from the CD
People using Ubuntu or any other user-friendly distro, might just have to insert the cd and it will be mounted automatically. If this is not the case:$ sudo mount /media/cdrom
should mount it.3.1.2. Mounting from an .iso image file
We will need to create a temporary directory, let say /tmp/ubuntu-livecd and then mount our iso (I will be using a feisty fawn iso).$ mkdir /tmp/ubuntu-livecd
$ sudo mount -o loop /path/to/feisty-desktop-i386.iso /tmp/ubuntu-livecd
Once the cd image is ready, it is time to mount the newly created usb bar partitions:$ sudo mount -o loop /path/to/feisty-desktop-i386.iso /tmp/ubuntu-livecd
3.2. Mounting the usb bar partitions
Same here, you might be able to get both your partition by simply replugging the usb pendrive, partition might appears as: /media/liveusb and /media/casper-rw. If this is not the case, then you will need to mount them manually:$ mkdir /tmp/liveusb
$ sudo mount /dev/sdb1 /tmp/liveusb
All the partitions we need are now mounted, let's copy the files.$ sudo mount /dev/sdb1 /tmp/liveusb
3.3. Copying the files to the usb bar
Let positionned yourself on the CD image directory (in my case: /tmp/ubuntu-livecd , but it might be /media/cdrom , and copy at the root of your usb first partition:- the directories: 'casper', 'disctree', 'dists', 'install', 'pics', 'pool', 'preseed', '.disk'
- The content of directory 'isolinux'
- and files 'md5sum.txt', 'README.diskdefines', 'ubuntu.ico'
- as well as files: 'casper/vmlinuz', 'casper/initrd.gz' and 'install/mt86plus'
$ cd /tmp/ubuntu-livecd
$ sudo cp -rf casper disctree dists install pics pool preseed .disk isolinux/* md5sum.txt README.diskdefines ubuntu.ico casper/vmlinuz casper/initrd.gz install/mt86plus /tmp/liveusb/
$ sudo cp -rf casper disctree dists install pics pool preseed .disk isolinux/* md5sum.txt README.diskdefines ubuntu.ico casper/vmlinuz casper/initrd.gz install/mt86plus /tmp/liveusb/
When i did the above procedure disctree ubuntu.ico was not available in my /tmp/ubuntu-livecd so dont worry about that two folders and proceed with your further steps.
It might complain about symbolic links not being able to create, you can ignore this.
Now let's go to the first partition of your usb disk and rename isolinux.cfg to syslinux.cfg:
$ cd /tmp/liveusb
$ sudo mv isolinux.cfg syslinux.cfg
change /tmp/liveusb according to your settings$ sudo mv isolinux.cfg syslinux.cfg
Edit syslinux.cfg so it looks like:
DEFAULT persistent GFXBOOT bootlogo GFXBOOT-BACKGROUND 0xB6875A APPEND file=preseed/ubuntu.seed boot=casper initrd=initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash -- LABEL persistent menu label ^Start Ubuntu in persistent mode kernel vmlinuz append file=preseed/ubuntu.seed boot=casper persistent initrd=initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash -- LABEL live menu label ^Start or install Ubuntu kernel vmlinuz append file=preseed/ubuntu.seed boot=casper initrd=initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash -- LABEL xforcevesa menu label Start Ubuntu in safe ^graphics mode kernel vmlinuz append file=preseed/ubuntu.seed boot=casper xforcevesa initrd=initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash -- LABEL check menu label ^Check CD for defects kernel vmlinuz append boot=casper integrity-check initrd=initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash -- LABEL memtest menu label ^Memory test kernel mt86plus append - LABEL hd menu label ^Boot from first hard disk localboot 0x80 append - DISPLAY isolinux.txt TIMEOUT 300 PROMPT 1 F1 f1.txt F2 f2.txt F3 f3.txt F4 f4.txt F5 f5.txt F6 f6.txt F7 f7.txt F8 f8.txt F9 f9.txt F0 f10.txtWoof, finally we have our usb disk almost usuable. We have a last thing to do: make the usb bootable.
3.4. Making the usb bar bootable.
in order to make our usb disk bootable, we need to install syslinux and mtools:$ sudo apt-get install syslinux mtools
And finally unmount /dev/sdb1 and make it bootable:$ cd
$ sudo umount /tmp/liveusb
$ sudo syslinux -f /dev/sdb1
Here we are :D , reboot, set your BIOS to boot from the usb bar and enjoy Ubuntu linux from a pendrive$ sudo umount /tmp/liveusb
$ sudo syslinux -f /dev/sdb1
4. Troubleshooting
If you are having trouble booting on the usb bar, this might be due to your MBR being corrupted. In order to fix it up, you can use lilo (I installed lilo on my box only for thid purpose).$ lilo -M /dev/sdb
will fix the MBR on device /dev/sdbCome on go ahead and use your Ubuntu Linux on a usb pendrive - happily wherever you go.
Thanks to :
http://www.debuntu.org/how-to-install-ubuntu-linux-on-usb-bar
My office colleagues who helped me
No comments:
Post a Comment